150/150 at 49degrees is 166/166 posible??
Good Day! Proc : Athlon 1.8 TBred "B"Mem : 256mb Kingstone 333 I've just updated my Bios to HoneyX ( 021029 ), Then I tried to increased my FSB to 143/143 stable, then 147/147 stable... then 150/150...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
I think your CPU, not your memory, is holding you back. If you are using a XP2200+ we are talking a 450MHz overclock at 166FSB.
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
Did you post at 150 and then try to change, or somewhere between 133 and 147 like I said before.The pll is REALLY buggy, in this case setting the 1/5 pci divider before changing the fsb is a...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
Is your fan running at FULL speed? I have an XP2000+ and the new Volcano11, full copper heatsink. I can never get temps as low as you're saying you get.With the fan set just "slightly" over half way,...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
The fan is at 3500 rpms and it maxes out at about 5800, so its a little bit over halfway.And the temps are fairly accurate as the heatsink is somewhat cool to the touch(and if the heatsink wasnt...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
apparently, the reason for the impossible post @166/166 is beacuase of a timing issue. I understand cheepo is working on a BIOS solution....if you can find out more post a new topic
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
Well, the illusive 166/166... I would not boot at 150/150... I would boot at 100/100 or 133/133 and step your way up... I have the same problem right now, but mine is because of a Sh*t power supply....
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
I'm running my K7S5A rev '0' on an ElCheapo 400 watt PSU that costs the exorbitant sum of $12.89 US SHIPPED! Get yours here...store.yahoo.com/upgradece...-p400.htmlAt this price, there is no excuse...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
I got my K7S5A & Athlon XP 1800+ (Polomino) to 147/147...with the honey X bios.. i'd like to jump past the 150/150 - which we know won't post... If I use SpeedFan or CPUCool to jump past the 150...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
It looks like your memory should be up to it, so if 166 is a no-go it'll need more juice. When I had my 2100 palomino I upped it to 1.85 with no problems. you'll need to connect the middle L11 bridge...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
wylie cQuote:It looks like your memory should be up to it,What memory? I fail to see any mention of memory at all, SDRAM, DDR, or otherwise, but I'll assume that he has SOMETHING in there, or he...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
Is that on your K7S5A, Milt?EDIT: Whoops... I meant is that 1600 Palamino overclock on your K7S5A board?
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
And one more question...The K7S5A Pro (and maybe the non-pro K7S5A, not too sure though) uses the ICS 9248-199 PLL which, according to this, is supposed to support up to 200MHz FSB.Why is it that the...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
AlphaArmsYes that's a 1600+ Palomino, penciled to 1.85 vCore on a K7S5A... with the 'chipset mod', and Crucial PC2700 cas2.5 set on SPDThe 166 and 200 boot problem is apparently related to a timing...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
Pretty nice... especially for a Pally + K7S5A combo. Maybe it just takes a little know-how, eh? I can only get my 2100+ Palamino up to 147/147MHz before it starts giving me BSODs at POST.
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
And Luck, don't forget that part.No question that I did get lucky with that Paly...I'm selling off my fancy cars so I can build a really fancy computerThese Muscle Cars and Street Rods are going fast,...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
Pfft.. I'm not modding the mobo.. I'll stick with what I have and enjoy my pc in a working state
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
You do whatever suits you but remember that the 'chipset mod' is the ONLY mod that I have made to my mobo.All it does is to ALLOW the factory installed gold heatsink to do it's job properly.It does...
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
Well.. What is involved in this? I thought someone gave me a link to a site with how-tos but I can't find it now.. Gimme info.. :>
View ArticleRe: 150/150 at 49degrees is 166/166 posible??
radel.inet.net.nz/chipset/pub65.ezboard.com/fk7s5am...=261.topic
View Article